How Many Balloons Would It Take To Lift a House? The physics of Pixar's Up.

In the new Pixar film Up, a crotchety old man named Carl ties thousands of balloons to his house and proceeds on an awesome flying adventure to South America. This left several Explainer readers wondering: Just how many balloons would it take to lift a house?

Between 100,000 and 23.5 million. The lower figure comes from the Wired Science blog, which took a crack at the calculation last week. After consulting with a house mover, Wired estimated that Carl's home in Up would be about 100,000 pounds. (Most houses weigh between 80,000 and 160,000 pounds.) Given that 1 cubic foot of helium can lift 0.067 pounds, it would take 1,492,537 cubic feet of helium to lift the house—or about as much as would be contained in 105,854 balloons, each 3 feet in diameter.
Print This ArticlePRINTDiscuss in the FrayDISCUSSEmail to a FriendE-MAILGet Slate RSS FeedsRSSShare This ArticleRECOMMEND...Single PageSINGLE PAGE
Yahoo! BuzzFacebook FacebookPost to MySpace!MySpaceMixx MixxDigg DiggReddit RedditDel.icio.us del.icio.usFurl FurlMa.gnolia.com Ma.gnoliaSphere SphereStumble UponStumbleUponCLOSE

This figure doesn't account for the weight of the balloons themselves, however. A 3-foot latex balloon—which is bigger than your average party balloon but smaller than the ones used in the extreme sport of cluster ballooning—might weigh about 1 ounce. So 105,854 of them would add 6,615 pounds to the weight of the house. The weight of the strings also needs to be taken into account. (A Wired Science commenter estimates that "non-optimal rigging" would require about 1,800 pounds of rope.) The Wired piece noted that it would take more balloons to lift Carl's house above the cloud cover, but according to experienced cluster balloonists, that's not necessarily true. If the balloons are made out of an elastic material like latex and haven't been fully inflated beforehand, they'll expand as they rise into the thinner atmosphere, which should keep the house rising steadily.

If Carl were trying to use regular old party balloons to fly his house, he'd need a whole lot more. A typical party balloon—11 inches in diameter, with 26 inches of curling ribbon—can lift 4.8 grams, or about 0.17 ounces. Assuming these flimsier balloons could withstand the strain—and not counting the extra string that would be involved—it would take more than 9.4 million balloons to lift Carl's house.

Meanwhile, Up co-director Pete Docter recently told Ballooning magazine that technicians at Pixar estimated it would take 23.5 million party balloons to lift a 1,800-square-foot house like Carl's, though it's unclear exactly what size balloon they were using to make their calculations. (In the film, the animators used 20,622 balloons for the liftoff sequence, but most of the other floating scenes have just 10,297.)